Three  BHK  Flat with an approved structural design  and the quality of each and every product used in the building has been ensured. Outer & inner walls are 9” inch thickness.

Quality: 53 Grade PPC cement and  Fe-500 grade rods.

Floorings:  800*800mm fully vitrified Johnson tiles and anti skid tiles for toilet areas.

Kitchen: 40mm Granite platform has been provided and dadoing of tiles of 4.5 ft above platform.

Electrical: Modular switches concealed by finolex wires with MCB&ELCB systems. T.V and telephone points are provided in Living room and Bedrooms. Fan and lights are provided. Provisions for A/C and Geycers are provided.

Carpentry: Main door is of Burma Teak wood frame and shutters with antique fittings with mortise lock. First quality saal wood are provided for inner door frames with waterproof flush doors. Saal wood for windows with Ms grills are provided .

Plumbing: Sanitary wares from Parryware  and  foam flow Parryware taps and washbasins are provided.

Bore point: 350 feet depth - good yield of water with three phase Suguna motor has provided.

Sump: Corporation water facility has been provided with capacity of 20,000 litres.

Tank: Two separate tank has been provided for corporation and bore water with capacity of 5,000ltrs each.

Paintings: Primer  and three coats of putty with roller finish emulsion paints for inner walls, enamel paints for grills and windows& shutters. Main door with melamine polish. Outer walls are provided  three coat putty and Asian Apex quality exterior paint finish.